Configuring Igmp Snooping Parameters In The Vlan - TP-Link T1600G-18TS Configuration Manual

Configuring Layer 2 Multicast

2.2.6 Configuring IGMP Snooping Parameters in the VLAN

Configuring Router Port Time and Member Port Time
Step 1 configure
Enter global configuration mode.
Step 2 ip igmp snooping vlan-config vlan-id-list [rtime router-time | mtime member-time ]
router-time
seconds.
member-time
600 seconds.
Step 3 show ip igmp snooping vlan vlan-id
Show the basic IGMP snooping configuration in the specified VLAN.
Step 4 end
Return to privileged EXEC mode.
Step 5 copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to enable IGMP Snooping in VLAN 2 and VLAN 3,
configure the router port time as 500 seconds and the member port time as 400 seconds:
Switch#configure
Switch(config)#ip igmp snooping
Switch(config)#ip igmp snooping vlan-config 2-3 rtime 500
Switch(config)#ip igmp snooping vlan-config 2-3 mtime 400
Switch(config)#show ip igmp snooping vlan 2
Vlan Id: 2
Router Time:500
Member Time:400
Static Router Port:None
Dynamic Router Port:None
Forbidden Router Port:None
Switch(config)#show ip igmp snooping vlan 3
Vlan Id: 3
Router Time:500
is the aging time of the router ports in the specified VLAN, ranging from 60 to 600
is the aging time of the member ports in the specified VLAN, ranging from 60 to
IGMP Snooping Configurations
Configuration Guide 292