Configuring Mld Snooping Parameters On The Port - TP-Link T1600G-18TS Configuration Manual

Configuring Layer 2 Multicast
Switch(config)#ip igmp snooping
Switch(config)#ipv6 mld snooping drop-unknown
Switch(config)#show ipv6 mld snooping
MLD Snooping
Unknown Multicast
Last Query Times
Last Query Interval
Global Member Age Time
Global Router Age Time
Global Report Suppression
Enable Port:
Enable VLAN:
Switch(config)#end
Switch#copy running-config startup-config

3.2.4 Configuring MLD Snooping Parameters on the Port

Configuring Router Port Time and Member Port Time
Step 1 configure
Enter global configuration mode.
Step 2 ipv6 mld snooping rtime rtime
ipv6 mld snooping mtime mtime
rtime
mtime
Step 3 show ipv6 mld snooping
Show the basic MLD snooping configuration.
Step 4 end
Return to privileged EXEC mode.
Step 5 copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to configure the global router port time and member
port time as 200 seconds:
Switch#configure
:Enable
:Discard
:2
:1
:260
:300
:Disable
is the aging time of router ports, ranging from 60 to 600 seconds.
is the aging time of member ports, ranging from 60 to 600 seconds.
Configuring MLD Snooping
Configuration Guide 324