TP-Link T1600G-18TS Configuration Manual page 65

Managing System
Step 2 Use the following command to create an account unencrypted or symmetric encrypted.
user name name { privilege operator | power_user | user } password { [ 0 ] password | 7
encrypted-password }
Create an account whose access level is Operator, Power User or User.
name
digits, English letters and underscore only.
operator | power_user |
and view mostly the settings of different functions. Power User can edit, modify and view some
the settings of different functions. User only can view the settings without the right to edit and
modify.
0: Specify the encryption type. 0 indicates that the password you entered is unencrypted, and
the password is saved to the configuration file unencrypted. By default, the encryption type is 0.
password
or symbols. The password is case sensitive, allows digits, English letters (case sensitive),
underlines and sixteen special characters.
7: Specify the encryption type. 7 indicates that the password you entered is symmetric
encrypted, and the password is saved to the configuration file symmetric encrypted.
encrypted-password
copy from another switch's configuration file. After the encrypted password is configured, you
should use the corresponding unencrypted password to reenter this mode.
Use the following command to create an account MD5 encrypted.
user name name { privilege operator | power_user | user } secret { [ 0 ] password | 5 encrypted-
password }
Create an account whose access level is Operator, Power User or User.
name
digits, English letters and underscore only.
operator | power_user |
and view mostly the settings of different functions. Power User can edit, modify and view some
the settings of different functions. User only can view the settings without the right to edit and
modify.
0: Specify the encryption type. 0 indicates that the password you entered is unencrypted, but
the password is saved to the configuration file MD5 encrypted. By default, the encryption type
is 0.
password
or symbols. The password is case sensitive, allows digits, English letters (case sensitive),
underlines and sixteen special characters.
5: Specify the encryption type. 5 indicates that the password you entered is MD5 encrypted,
and the password is saved to the configuration file MD5 encrypted.
encrypted-password
from another switch's configuration file. After the encrypted password is configured, you
should use the corresponding unencrypted password to reenter this mode.
Step 3 aaa enable
Globally enable the AAA function.
: Enter a user name for users' login. It contains 16 characters at most, composed of
user: Select the access level for the user. Operator can edit, modify
: Enter a password for users' login. It is a string from 1 to 31 alphanumeric characters
: Enter a symmetric encrypted password with fixed length, which you can
: Enter a user name for users' login. It contains 16 characters at most, composed of
user: Select the access level for the user. Operator can edit, modify
: Enter a password for users' login. It is a string from 1 to 31 alphanumeric characters
: Enter a MD5 encrypted password with fixed length, which you can copy
User Management Configurations
Configuration Guide 42