Configuring QoS
Switch(config-if)#bandwidth ingress 5120 egress 1024
Switch(config-if)#show bandwidth interface gigabitEthernet 1/0/5
Port
---------
Gi1/0/5
Switch(config-if)#end
Switch#copy running-config startup-config
3.2.2 Configuring Storm Control
Configure the upper rate limit on the port for forwarding broadcast packets, multicast
packets and unknown unicast frames.
Step 1
configure
Enter global configuration mode
Step 2
interface { fastEthernet port | range fastEthernet port-list | gigabitEthernet port | range
gigabitEthernet port-list | port-channel lag-id | range port-channel lag-list }
Enter interface configuration mode.
port |port-list
lag-id |lag-list:
IngressRate(Kbps)
----------------------
5120
: The number or the list of the Ethernet port that you want to configure.
The ID or the list of the LAG that you want to configure.
EgressRate(Kbps)
----------------------
1024
Bandwidth Control Configuration
LAG
------------
N/A
Configuration Guide
452