Configuring Voice Vlan Globally - TP-Link T1600G-18TS Configuration Manual

Configuring Voice VLAN

2.1.2 Configuring Voice VLAN Globally

Choose the menu QoS > Voice VLAN > Global Config to load the following page.
Figure 2-2 Configuring Voice VLAN Globally
Follow these steps to configure the voice VLAN globally:
1) Enable the voice VLAN feature, and enter a VLAN ID.
VLAN ID
2) Set the aging time for the voice VLAN.
Aging Time
3) Specify a priority for the voice VLAN.
Priority
4) Click Apply.
Specify an existing VLAN as the voice VLAN.
Specify the length of time that a port remains in the voice VLAN after the port
receives a voice packet. Aging time works only for ports in automatic voice VLAN
mode. The range is 1 to 43200 minutes; the default is 1440 minutes.
Specify the priority that will be assigned to voice packets. A bigger value means a
higher priority. The range is 0 to 7; the default is 6.
This is an IEEE 802.1p priority, and you can further configure its schedule mode if
needed. For details about schedule mode, please refer to
Voice VLAN Configuration
Configuring QoS.
Configuration Guide 466