Configuring Network Security
Host Name
IP Address
MAC Address
VLAN ID
2) Select protect type for the entry.
Protect Type
3) Select the port that is connected to this host.
4) Click Bind.
2.1.2 Binding Entries Dynamically
The binding entries can be dynamically learned from ARP Scanning and DHCP Snooping.
ARP Scanning
With ARP Scanning, the switch sends the ARP request packets of the specified IP field to
the hosts. Upon receiving the ARP reply packet, the switch can get the IP address, MAC
address, VLAN ID and the connected port number of the host. You can bind these entries
conveniently.
Enter the host name for identification.
Enter the IP address.
Enter the MAC address.
Enter the VLAN ID.
Select the protect type for the entry:
None: This entry will not be applied to any feature.
ARP Detection: This entry will be applied to the ARP Detection feature.
IP-MAC Binding Configurations
Configuration Guide
546