TP-Link T1600G-18TS Configuration Manual page 519

Configuring PoE
Step 5 show power profile
Verify the defined PoE profile.
Step 6 end
Return to privileged EXEC mode.
Step 7 copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to create a profile named profile1and bind the profile to
the port 1/0/6.
Switch#configure
Switch(config)#power profile profile1 supply enable priority middle consumption class2
Switch(config)#show power profile
Index Name
----- ------------
1 profile1
Switch(config)#interface gigabitEthernet 1/0/6
Switch(config-if)#power inline profile profile1
Switch(config-if)#show power inline configuration interface gigabitEthernet 1/0/6
Interface PoE-Status PoE-Prio Power-Limit(w) Time-Range
---------- ----------
Gi1/0/6 Enable
Switch(config-if)#end
Switch#copy running-config startup-config
Status Priority
---------- ---------
Enable Middle
---------- ------------
Middle Class2
PoE Power Management Configurations
Power-Limit(w)
--------------
Class2
-------------
No Limit
PoE-Profile
----------------
profile1
Configuration Guide 496