Configuring Fast Leave - TP-Link T1600G-18TS Configuration Manual

Configuring Layer 2 Multicast
Step 3 end
Return to privileged EXEC mode.
Step 4 show ip igmp snooping
Show the basic IGMP snooping configuration.
Step 5 copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to configure the global router port time and member
port time as 200 seconds:
Switch#configure
Switch(config)#ip igmp snooping
Switch(config)#ip igmp snooping rtime 200
Switch(config)#ip igmp snooping mtime 200
Switch(config)#show ip igmp snooping
IGMP Snooping
Unknown Multicast
Last Query Times
Last Query Interval
Global Member Age Time
Global Router Age Time
Global Report Suppression
Global Authentication Accounting:Disable
Enable Port:
Enable VLAN:
Switch(config-if)#end
Switch#copy running-config startup-config

Configuring Fast Leave

Step 1 configure
Enter global configuration mode.
Step 2 interface {fastEthernet port | range fastEthernet port-list | gigabitEthernet port | range
gigabitEthernet port-list | port-channel port-channel-id | range port-channe port-channel-list }
Enter interface configuration mode
:Enable
:Pass
:2
:1
:200
:200
:Disable
IGMP Snooping Configurations
Configuration Guide 288