Configuring The Ssh Feature - TP-Link T1600G-18TS Configuration Manual

Managing System
Switch(config)#ip http secure-ciphersuite 3des-ede-cbc-sha
Switch(config)#ip http secure-session timeout 15
Switch(config)#ip http secure-max-users 1 2
Switch(config)#ip http secure-server download certificate ca.crt ip-address
192.168.0.100
Start to download SSL certificate......
Download SSL certificate OK.
Switch(config)#ip http secure-server download key ca.key ip-address 192.168.0.100
Start to download SSL key......
Download SSL key OK.
Switch(config)#show ip http secure-server
HTTPS Status:
SSL Protocol Level(s):
SSL CipherSuite:
HTTPS Session Timeout:
HTTPS User Limitation:
HTTPS Max Admin Users:
HTTPS Max Guest Users:
Switch(config)#end
Switch#copy running-config startup-config

5.2.4 Configuring the SSH Feature

Follow these steps to configure the SSH function:
Step 1 configure
Enter global configuration mode.
Step 2 ip ssh server
Enable the SSH function. By default, it is disabled.
Step 3 ip ssh version { v1 | v2 }
Configure to make the switch support the corresponding protocol. By default, the switch
supports SSHv1 and SSHv3.
v1 |
Enabled
ssl3 tls1
3des-ede-cbc-sha
15
Enabled
1
2
v2: Select to enable the corresponding protocol.
Access Security Configurations
Configuration Guide 66