TP-Link T1600G-18TS Configuration Manual page 668

Configuring LLDP
Follow these steps to view the local information:
1) In the Auto Refresh section, enable the Auto Refresh feature and set the Refresh Rate
according to your needs. Click Apply.
2) In the Local Info section, select the desired port and view its associated local device
information.
Local Interface
Chassis ID
Subtype
Chassis ID
Port ID Subtype
Port ID
TTL
Port Description
System Name
System
Description
System
Capabilities
Supported
System
Capabilities
Enabled
Management
Address
Displays the local port ID.
Displays the Chassis ID type.
Displays the value of the Chassis ID.
Displays the Port ID type.
Displays the value of the Port ID.
Specify the amount of time the neighbor device should hold the received
information before discarding it.
Displays the description of the local port.
Displays the system name of the local device.
Displays the system description of the local device.
Displays the supported capabilities of the local system.
Displays the primary functions of the local device.
Displays the management address of the local device.
Viewing LLDP Settings
Configuration Guide 645