TP-Link T1600G-18TS Configuration Manual page 453

Configuring ARP
Step 3 show arp [ ip ] [ mac ]
or
show ip arp [ ip ] [ mac ]
Verify the ARP entries.
ip
mac:
Step 4 end
Return to privileged EXEC mode.
Step 5 copy running-config startup-config
Save the settings in the configuration file.
This example shows how to create a static ARP entry with the IP as 192.168.0.1 and the
MAC as 00:11:22:33:44:55:
Switch#configure
Switch(config)#arp 192.168.0.1 00:11:22:33:44:55 arpa
Switch(config)#show arp 192.168.0.1
Interface
Vlan1
Switch(config)#end
Switch#copy running-config startup-config
 Configuring the aging time of dynamic ARP entries
Follow these steps to configure the aging time of dynamic ARP entries:
Step 1 configure
Enter global configuration mode.
Step 2 interface {fastEthernet port | range fastEthernet port-list | gigabitEthernet port | range
gigabitEthernet port-list ]
Enter interface configuration mode.
port| port-list
interface vlan vlan-id
Enter interafce VLAN mode.
vlan-id:
: Specify the IP address of your desired ARP entry.
Specify the MAC address of your desired ARP entry.
Address Hardware Addr
192.168.0.1 00:11:22:33:44:55
: The number or the list of the Ethernet port that you want to configure.
Specify a vlan interface ID.
Type
STATIC
Configuration Guide
ARP Configurations
430