Configuring Layer 2 Multicast
Figure 2-8 Profile Binding
Binding Profile and Member Ports
Follow these steps to bind the profile to the port.
1) Select the port to be bound, and enter the Profile ID in the Profile ID column.
Select
Port
Profile ID
ClearBinding
2) Click Apply.
Configuring Max Groups a Port Can Join
Follow these steps to configure the maximum groups a port can join and overflow action.
1) Select a port to configure its Max Group and Overflow Action.
Select
Select the port to be bound.
Displays the port number.
Enter the profile ID you create to bind the profile to the port. One port can only be
bound to one profile.
Click to clear the binding between the profile and the port.
Select the port to be configured.
IGMP Snooping Configurations
Configuration Guide
279