TP-Link T1600G-18TS Configuration Manual page 706

Configuring Maintenance
The following example shows how to set the remote log on the switch. Enable log host 2,
set its IP address as 192.168.0.148, and allow logs of levels 0 to 5 to be sent to the host:
Switch#configure
Switch(config)# logging host index 2 192.168.0.148 5
Switch(config)# show logging loghost
Index Host-IP
----- -------
1 0.0.0.0
2 192.168.0.148 5
3 0.0.0.0
4 0.0.0.0
Switch(config)#end
Switch#copy running-config startup-config
Severity Status
-------- ------
6 disable
enable
6 disable
6 disable
System Log Configurations
Configuration Guide 683