TP-Link T1600G-18TS Configuration Manual page 390

Configuring Layer 2 Multicast
Figure 5-22 Enable IGMP Snooping in the VLAN
6) Specify the multicast data that Host C and Host D can receive.
a. Choose the menu Multicast > IGMP Snooping > Profile Config to load the following
page. Create Profile 1, select Permit as the Mode and click Create.
Figure 5-23 Create Profile 1
b. Choose the menu Multicast > IGMP Snooping > Profile Config to load the following
page.
Configuration Examples
Configuration Guide 367