Configuring Static Multicast (Multicast Ip And Forward Port) - TP-Link T1600G-18TS Configuration Manual

Configuring Layer 2 Multicast

Configuring Static Multicast (Multicast IP and Forward Port)

Step 1 configure
Enter global configuration mode.
Step 2 ip igmp snooping vlan-config vlan-id-list static ip interface {gigabitEthernet port-list | port-
channel port-channel-id }
vlan-id-list
ip
port-list
multicast IP address in the specified VLAN.
Step 3 show ip igmp snooping groups static
Show the static IGMP snooping configuration.
Step 4 end
Return to privileged EXEC mode.
Step 5 copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to configure 226.0.0.2 as the static multicast IP and
specify port 1/0/9-10 as the forward ports:
Switch#configure
Switch(config)#ip igmp snooping
Switch(config)#ip igmp snooping vlan-config 2 static 226.0.0.2 interface
gigabitEthernet 1/0/9-10
Switch(config)#show ip igmp snooping groups static
Multicast-ip VLAN-id
------------
226.0.0.2
Switch(config)#end
Switch#copy running-config startup-config
2.2.7 Configuring IGMP Snooping Parameters in the Multicast VLAN
Configuring Router Port Time and Member Port Time
Step 1 configure
Enter global configuration mode.
specifies the VLAN to be configured.
specifies the static multicast IP address.
and specify the forward ports (member ports) bound to the static
port-channel-id
Addr-type
------- -------------
2 static
Switch-port
-------------
Gi1/0/9-10
IGMP Snooping Configurations
Configuration Guide 295