TP-Link T1600G-18TS Configuration Manual page 515

Configuring PoE
 Binding the Profile to the Corresponding Ports
Figure 2-3 Bind the Profile to the Corresponding Ports
Follow these steps to bind the profile to the corresponding ports:
1) In the Global Config section, specify the System Power Limit and click Apply.
System Power
Limit
System Power
Consumption
System Power
Remain
2) In the Port Config section, select a profile and bind it to the corresponding ports. Click
Apply.
Port Select
Time Range
PoE Profile
Power(w)
Current(mA)
Specify the maximum power the PoE switch can supply.
Displays the real-time system power consumption of the PoE switch.
Displays the real-time system remaining power of the PoE switch.
Specify the port number and click Select to quick-select the corresponding entry.
Only one port can be selected at a time.
Select a time range, then the port will supply power only during the time range. For
how to create a time range, refer to
Select the PoE profile set in the PoE Profile section for the desired port. If one
profile is selected, you will not be able to modify PoE status, PoE priority or power
limit manually.
Displays the port's real-time power supply.
Displays the port's real-time current.
PoE Power Management Configurations
Time Range Function Configurations.
Configuration Guide 492