Configuring Static Member Port - TP-Link T1600G-18TS Configuration Manual

Configuring Layer 2 Multicast
Figure 2-11 Static Member Port

Configuring Static Member Port

Follow these steps to configure static member port.
1) Enter the Multicast IP and VLAN ID. Specify the Static Member Port.
Multicast IP
VLAN ID
Forward Port
2) Click Create.
Viewing IGMP Static Multicast Groups
You can search IGMP static multicast entries by using Multicast IP, VLAN ID or Forward
Port as the Search Option.
Static Multicast IP Table displays details of all IGMP static multicast groups.
Specify the multicast group that the static member is in.
Specify the VLAN that the static member is in.
Specify one or more ports to be the static member port in the multicast group.
Without aging, the static member port receives all multicast data sent to this
multicast group.
IGMP Snooping Configurations
Configuration Guide 283