Managing System
Step 5
copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to set the SDM template as enterpriseV4.
Switch#config
Switch(config)#show sdm prefer enterpriseV4
"enterpriseV4" template:
number of IP ACL Rules
number of MAC ACL Rules
number of Combined ACL Rules
number of IPV6 ACL Rules
number of IPV6 Source Guard Entries : 0
number of ARP Detection Entries
Switch(config)#sdm prefer enterpriseV4
Switch to "enterpriseV4" tempale.
Changes to the running SDM preferences have been stored, but cannot take effect until
reboot the switch.
Switch(config)#end
Switch#copy running-config startup-config
: 120
: 84
: 0
: 0
: 200
SDM Template Configuration
Configuration Guide
72