TP-Link T1600G-18TS Configuration Manual page 750

Configuring SNMP & RMON
Step 2
Step 3
Step 4
Step 5
The following example shows how to create an event entry on the switch. Set the user
name as admin, the event type as Notify (set the switch to initiate notifications to the NMS),
and the owner as monitor:
Switch#configure
Switch(config)#rmon event 1 user admin description rising-notify type notify owner
monitor
Switch(config)#show rmon event
Index User
----- ----
1 admin
Switch(config)#end
Switch#copy running-config startup-config
rmon event index [ user user-name ] [ description description ] [ type { none | log | notify |
log-notify }] [ owner owner-name ]
Configuring RMON event entries.
Enter the index of the event entry from 1 to12 in the format of 1-3 or 5.
index:
Enter the SNMP user name or community name of the entry. The name should
user-name:
be what you have set in SNMP previously. The default name is public.
Give a description to the entry with 1 to 16 characters. By default, the
description:
description is empty.
none | log | notify | log-notify :
the specified action to deal with the event. By default, the type is none. None indicates
the switch takes no action, log indicates the switch records the event, notify indicates the
switch sends notifications to the NMS, and log-notify indicates the switch records the event
and sends notifications to the NMS.
Enter the owner name of the entry with 1 to 16 characters. The default name is
owner-name:
monitor.
show rmon event [ index ]
Displays the specified event entry and related configurations.
Enter the index of event entries that you want to view. The range is 1 to 12, and the
index:
format is 1-3 or 5.
end
Return to privileged EXEC mode.
copy running-config startup-config
Save the settings in the configuration file.
Description Type
----------- ----
rising-notify Notify
Specify the action type of the event; then the switch will take
Owner State
----- -----
monitor Enable
RMON Configurations
Configuration Guide 727