TP-Link T1600G-18TS Configuration Manual page 59

Managing System
smonth
Jan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct, Nov, Dec.
sday
stime
syear
emonth
Jan, Feb, Mar, Apr, May, Jun, Jul, Aug, Sep, Oct, Nov, Dec.
eday
etime
eyear
offset
Step 3 show system-time dst
Verify the DST information of the switch.
Step 4 end
Return to privileged EXEC mode.
Step 5 copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to set the Daylight Saving Time by Date Mode. Set the
start time as 01:00 August 1st, 2016, set the end time as 01:00 September 1st,2016 and
set the offset as 50.
Switch#configure
Switch(config)#system-time dst date Aug 1 01:00 2016 Sep 1 01:00 2016 50
Switch(config)#show system-time dst
DST starts at 01:00:00 on Aug 1 2016
DST ends at 01:00:00 on Sep 1 2016
DST offset is 50 minutes
DST configuration is one-off
Switch(config)#end
Switch#copy running-config startup-config
: Enter the start month of Daylight Saving Time. There are 12 values showing as follows:
: Enter the start day of Daylight Saving Time, which ranges from 1 to 31.
: Enter the start time of Daylight Saving Time,in the format of HH:MM.
: Enter the start year of Daylight Saving Time.
: Enter the end month of Daylight Saving Time. There are 12 values showing as follows:
: Enter the end day of Daylight Saving Time, which ranges from 1 to 31.
: Enter the end time of Daylight Saving Time,in the format of HH:MM.
: Enter the end year of Daylight Saving Time.
: Enter the offset of Daylight Saving Time. The default value is 60.
System Info Configurations
Configuration Guide 36