TP-Link T1600G-18TS Configuration Manual page 636

Configuring Network Security
6) Choose the menu Network Security > 802.1X Authentication > Global Config to load
the following page. Enable 802.1X authentication and configure the Authentication
Method as EAP. Enable the Quiet feature and then keep the default authentication
settings.
Figure 8-14 Global Config
7) Choose the menu Network Security > 802.1X Authentication > Port Config to load
the following page. For port 1/0/1, enable 802.1X authentication, set the Control Mode
as auto and set the Control Type as MAC Based; For port 1/0/2 and port 1/0/3, disable
802.1X authentication.
Configuration Examples
Configuration Guide 613