TP-Link T1600G-18TS Configuration Manual page 521

Configuring PoE
Holiday
2) In the Add Absolute or Periodic section, specify the parameters and click Add.
When the Absolute mode is selected, the following section will be shown.
Figure 3-2 Absolute Mode
Type
From Time
To Time
When the Periodic mode is selected, the following section will be shown.
Figure 3-3 Periodic Mode
Type
Start Time
End Time
Day of the Week
3) Click Apply.
Select to Include or Exclude the holiday in a time-range. If Exclude is selected,
the time-range will not take effect on holiday and the PoE Status is disabled.
Otherwise, the time-range will not be affected by holiday.
Select Absolute time to configure.
Specify the starting time of the absolute mode.
Specify the ending time of the absolute mode.
Select Periodic time to configure.
Specify the start time of the periodic mode.
Specify the end time of the periodic mode.
Select day of the week for the periodic mode.
Time-Range Function Configurations
Configuration Guide 498