Viewing The Log Table - TP-Link T1600G-18TS Configuration Manual

Configuring Maintenance

3.1.4 Viewing the Log Table

Choose the menu Maintenance > Log> Log Table to load the following page.
Figure 3-4 Viewing the Log Table
Select a module and a severity to view the corresponding log information.
Time
Module
Severity
3.2 Using the CLI
3.2.1 Configuring the Local Log
Follow these steps to configure the local log:
Step 1 configure
Enter global configuration mode.
To get the exact time when the log event occurs, you need to configure the system
time on the System > System Info > System Time Web management page.
Select a module from the drop-down list to display the corresponding log information.
Select a severity level to display the log information whose severity level value is the
same or smaller.
System Log Configurations
Configuration Guide 680