Creating An Snmp View - TP-Link T1600G-18TS Configuration Manual

Configuring SNMP & RMON
0 Get-next PDUs
0 Set-request PDUs
0 SNMP packets output
0 Too big errors(Maximum packet size 1500)
0 No such name errors
0 Bad value errors
0 General errors
0 Response PDUs
0 Trap PDUs
Switch(config)#show snmp-server engineID
Local engine ID : 80002e5703000aeb132397
Remote engine ID: 123456789a
Switch(config)#end
Switch#copy running-config startup-config

2.2.2 Creating an SNMP View

Specify the OID (Object Identifier) of the view to determine objects to be managed.
Step 1
Step 2
Step 3
Step 4
configure
Enter global configuration mode.
snmp-server view name mib-oid {include | exclude}
Configure the view.
Enter a view name with 1 to 16 characters.You can create multiple entries with each
name :
associated to a MIB object. A complete view consists of all MIB objects that have the same
view name.
Enter the MIB object ID with 1 to 61 characters.
mib-oid :
include|exclude : Specify a view type. Include indicates that objects of the view can be
managed by the NMS, while exclude indicates that objects of the view cannot be managed
by the NMS.
show snmp-server view
Displays the view table.
end
Return to Privileged EXEC Mode.
SNMP Configurations
Configuration Guide 703