TP-Link T1600G-18TS Configuration Manual page 373

Configuring Layer 2 Multicast
Switch(config-if-range)#exit
Switch(config)#interface gigabitEthernet 1/0/4
Switch(config-if)#switchport general allowed vlan 10 tagged
Switch(config-if)#exit
5) Set the PVID of port 1/0/1-4 as 10.
Switch(config)#interface range gigabitEthernet 1/0/1-4
Switch(config-if-range)#switchport pvid 10
Switch(config-if-range)#exit
6) Enable IGMP Snooping in VLAN 10.
Switch(config)#ip igmp snooping vlan-config 10
7) Save the settings.
Switch(config)#end
Switch#copy running-config startup-config
Verify the Configurations
Show members in the VLAN:
Switch(config)#show vlan brief
VLAN Name
----- --------------------
1 System-VLAN
10 vlan10
Show status of IGMP Snooping globally, on the ports and in the VLAN:
Switch(config)#show ip igmp snooping
IGMP Snooping
Unknown Multicast
Last Query Times
Last Query Interval
Global Member Age Time
Global Router Age Time
Status
---------
active
active
:Enable
:Pass
:2
:1
:260
:300
Ports
----------------------------------------
Gi1/0/1, Gi1/0/2, Gi1/0/3, Gi1/0/4,
Gi1/0/5, Gi1/0/6, Gi1/0/7, Gi1/0/8,
...
Gi1/0/1, Gi1/0/2, Gi1/0/3, Gi1/0/4
Configuration Guide
Configuration Examples
350