TP-Link T1600G-18TS Configuration Manual page 623

Configuring Network Security
Step 3
Step 4
Step 5
Step 6
Step 7
The following example shows how to apply the existing Login method list named Login1
and Enable method list named Enable1 for the application SSH.
Switch#configure
Switch(config)#line ssh
Switch(config-line)#login authentication Login1
Switch(config-line)#enable authentication Enable1
Switch(config-line)#show aaa global
......
Module
Telnet
Ssh
Http
Switch(config-line)#end
Switch#copy running-config startup-config
 HTTP
Follow these steps to apply the Login and Enable method lists for the application HTTP:
login authentication { method-list }
Apply the Login method list for the application SSH.
: Specify the name of the Login method list.
method-list
enable authentication { method-list }
Apply the Enable method list for the application SSH.
: Specify the name of the Enable method list.
method-list
show aaa global
Verify the configuration of application list.
end
Return to privileged EXEC mode.
copy running-config startup-config
Save the settings in the configuration file.
Login List Enable List
default default
Login1 Enable1
default default
AAA Configuration
Configuration Guide 600