Configuring Event - TP-Link T1600G-18TS Configuration Manual

Configuring SNMP & RMON
Interval
Max Buckets
3) Enter the owner name, and set the status of the entry. Click Apply.
Owner
Status

5.1.3 Configuring Event

Choose the menu SNMP > RMON > Event to load the following page.
Figure 5-3 Event Table
Follow these steps to configure event:
1) Choose an event entry, and set the SNMP User of the entry.
Index
User
2) Set the description and type of the event.
Set the sample interval from 10 to 3600 seconds; the default is 1800
seconds. Every history entry has its own timer. For the monitored port, the
switch collects packet information and generates a record in every interval.
Set the maximum number of records for the history entry. When the number
of records exceeds the limit, the earliest record will be overwritten. The
ranges are from 10 to 130; the default is 50.
Enter the owner name of the entry with 1 to 16 characters. By default, it is
monitor.
Enable or disable the entry. By default, it is disabled.
Enable: The entry is enabled.
Disable: The entry is disabled.
Displays the index of event entries. There are 12 event entries all together.
Enter the SNMP user name or community name of the entry. The name should
be what you have set in SNMP previously. By default, it is public.
RMON Configurations
Configuration Guide 721