Configuring Forbidden Router Port - TP-Link T1600G-18TS Configuration Manual

Configuring Layer 2 Multicast
Step 3 show ipv6 mld snooping vlan vlan-id
Show the basic MLD snooping configuration in the specified VLAN.
Step 4 end
Return to privileged EXEC mode.
Step 5 copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to enable MLD Snooping in VLAN 2 and configure port
1/0/2 as the static router port:
Switch#configure
Switch(config)#ipv6 mld snooping
Switch(config)#ipv6 mld snooping vlan-config 2 rport interface gigabitEthernet 1/0/2
Switch(config)#show ipv6 mld snooping vlan 2
Vlan Id: 2
Router Time:0
Member Time:0
Static Router Port:Gi1/0/2
Dynamic Router Port:None
Forbidden Router Port:None
Switch(config)#end
Switch#copy running-config startup-config

Configuring Forbidden Router Port

Step 1 configure
Enter global configuration mode.
Step 2 ipv6 mld snooping vlan-config vlan-id-list router-ports-forbidden interface {gigabitEthernet
port-list | port-channel port-channel-id }
port-list
VLAN.
Step 3 show ipv6 mld snooping vlan vlan-id
Show the basic MLD snooping configuration in the specified VLAN.
Step 4 end
Return to privileged EXEC mode.
and are the ports that cannot become router ports in the specified
port-channel-id
Configuring MLD Snooping
Configuration Guide 330