Configuring Igmp Snooping Parameters Globally - TP-Link T1600G-18TS Configuration Manual

Configuring Layer 2 Multicast
Switch(config)#interface gigabitEthernet 1/0/3
Switch(config-if)#ip igmp snooping
Switch(config-if)#show ip igmp snooping
IGMP Snooping
Unknown Multicast
Last Query Times
Last Query Interval
Global Member Age Time
Global Router Age Time
Global Report Suppression
Global Authentication Accounting:Disable
Enable Port:Gi1/0/3
Enable VLAN:
Switch(config-if)#end
Switch#copy running-config startup-config

2.2.3 Configuring IGMP Snooping Parameters Globally

Configuring Report Message Suppression
Step 1 configure
Enter global configuration mode.
Step 2 ip igmp snooping report-suppression
Enable Report Message Suppression globally. If this function is enabled, the switch will only
forward the first IGMP report message to Layer 3 devices and suppress subsequent IGMP
report messages from the same multicast group during one query interval, which reduces the
number of IGMP packets.
Step 3 end
Return to privileged EXEC mode.
Step 4 show ip igmp snooping
Show the basic IGMP snooping configuration.
Step 5 copy running-config startup-config
Save the settings in the configuration file.
:Enable
:Pass
:2
:1
:260
:300
:Disable
IGMP Snooping Configurations
Configuration Guide 285