Configuring Multicast Filtering - TP-Link T1600G-18TS Configuration Manual

Configuring Layer 2 Multicast
Switch(config)#ipv6 mld snooping
Switch(config)#ipv6 mld snooping querier vlan 4 query-interval 100
Switch(config)#ipv6 mld snooping querier vlan 4 max-response-time 20
Switch(config)#ipv6 mld snooping querier vlan 4 general-query source-ip
fe80::2ff:ffff:fe00:1
Switch(config)#show ipv6 mld snooping querier
VLAN 4:
--------------
Maximum Response Time:
Query Interval:
General Query Source IP:
Switch(config)#end
Switch#copy running-config startup-config

3.2.9 Configuring Multicast Filtering

Creating Profile
Step 1 configure
Enter global configuration mode.
Step 2 ipv6 mld profile id
Create a new profile and enter profile configuration mode.
Step 3 deny
permit
Configure the profile's filtering mode.
permit
join specific multicast groups.
deny
specific multicast groups.
Step 4 range start-ip end-ip
Configure the range of multicast IP to be filtered.
the IP range respectively.
Step 5 end
Return to privileged EXEC mode.
20
100
fe80::2ff:ffff:fe00:1
is similar to a whitelist, indicating that the switch only allow specific member ports to
is similar to a blacklist, indicating that the switch disallow specific member ports to join
Configuring MLD Snooping
, are the start IP and end IP of
start-ip end-ip
Configuration Guide 338