Configuring Mld Snooping Parameters In The Multicast Vlan - TP-Link T1600G-18TS Configuration Manual

Configuring Layer 2 Multicast
Step 5 copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to configure ff01::1234:02 as the static multicast IP and
specify port 1/0/9-10 as the forward ports:
Switch#configure
Switch(config)#ipv6 mld snooping
Switch(config)#ipv6 mld snooping vlan-config 2 static ff01::1234:02 interface
gigabitEthernet 1/0/9-10
Switch(config)#show ipv6 mld snooping groups static
Multicast-ip
------------
ff01::1234:02
Switch(config)#end
Switch#copy running-config startup-config

3.2.7 Configuring MLD Snooping Parameters in the Multicast VLAN

Configuring Router Port Time and Member Port Time
Step 1 configure
Enter global configuration mode.
Step 2 ipv6 mld snooping multi-vlan-config [ vlan-id ] [rtime router-time | mtime member-time ]
vlan-id
router-time
seconds.
member-time
600 seconds.
Step 3 show ipv6 mld snooping multi-vlan
Show the MLD snooping configuration in the multicast VLAN.
Step 4 end
Return to privileged EXEC mode.
Step 5 copy running-config startup-config
Save the settings in the configuration file.
VLAN-id Addr-type
------- ---------
2 static
specifies the VLAN to be created or to be configured.
is the aging time of the router ports in the multicast VLAN, ranging from 60 to 600
is the aging time of the member ports in the multicast VLAN, ranging from 60 to
Configuring MLD Snooping
Switch-port
-----------
Gi1/0/9-10
Configuration Guide 332