Configuring 802.1X On Ports - TP-Link T1600G-18TS Configuration Manual

Configuring Network Security

6.1.3 Configuring 802.1X on Ports

Choose the menu Network Security > 802.1X > Port Config to load the following page.
Figure 6-8 Port Config
Configure 802.1X authentication on the desired port and click Apply .
Status
Guest VLAN
Control Mode
Control Type
Authorized
LAG
Enable 802.1X authentication on the port.
Select whether to enable Guest VLAN on the port.
Select the Control Mode for the port. By default, it is Auto.
Auto: If this option is selected, the port can access the network only when it is
authenticated.
Force-Authorized: If this option is selected, the port can access the network without
authentication.
Force-Unauthorized: If this option is selected, the port can never be authenticated.
Select the Control Type for the port. By default, it is MAC Based.
MAC Based: All clients connected to the port need to be authenticated.
Port Based: If a client connected to the port is authenticated, other clients can access
the LAN without authentication.
Displays whether the port is authorized or not.
Displays the LAG the port belongs to.
802.1X Configuration
Configuration Guide 577