Configuring Mld Snooping Parameters In The Vlan - TP-Link T1600G-18TS Configuration Manual

Configuring Layer 2 Multicast
The following example shows how to configure the last listener query count as 5 and the
last listener query interval as 5 seconds:
Switch#configure
Switch(config)#ipv6 mld snooping
Switch(config)#ipv6 mld snooping last-listener query-count 5
Switch(config)#ipv6 mld snooping last-listener query-interval 5
Switch(config)#show ipv6 mld snooping
MLD Snooping
Unknown Multicast
Last Query Times
Last Query Interval
Global Member Age Time
Global Router Age Time
Global Report Suppression
Enable Port:
Enable VLAN:
Switch(config)#end
Switch#copy running-config startup-config

3.2.6 Configuring MLD Snooping Parameters in the VLAN

Configuring Router Port Time and Member Port Time
Step 1 configure
Enter global configuration mode.
Step 2 ipv6 mld snooping vlan-config vlan-id-list [rtime router-time | mtime member-time ]
router-time
seconds.
member-time
600 seconds.
Step 3 show ipv6 mld snooping vlan vlan-id
Show the basic MLD snooping configuration in the specified VLAN.
Step 4 end
Return to privileged EXEC mode.
:Enable
:Pass
:5
:5
:260
:300
:Disable
is the aging time of the router ports in the specified VLAN, ranging from 60 to 600
is the aging time of the member ports in the specified VLAN, ranging from 60 to
Configuring MLD Snooping
Configuration Guide 328