Binding Profile To The Port - TP-Link T1600G-18TS Configuration Manual

Configuring Layer 2 Multicast
Step 6 show ipv6 mld profile [ id ]
Show the detailed MLD profile configuration.
Step 7 copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to configure Profile 1 so that the switch filters multicast
data sent to ff01::1234:5-ff01::1234:8:
Switch#configure
Switch(config)#ipv6 mld snooping
Switch(config)#ipv6 mld profile 1
Switch(config-mld-profile)#deny
Switch(config-mld-profile)#range ff01::1234:5 ff01::1234:8
Switch(config-mld-profile)#show ipv6 mld profile
MLD Profile 1
deny
range ff01::1234:5 ff01::1234:8
Switch(config)#end
Switch#copy running-config startup-config

Binding Profile to the Port

Step 1 configure
Enter global configuration mode.
Step 2 interface {fastEthernet port | range fastEthernet port-list | gigabitEthernet port | range
gigabitEthernet port-list | port-channel port-channel-id | range port-channe port-channel-list }
Enter interface configuration mode
Step 3 ipv6 mld filter profile-id
Bind
Step 4 show ipv6 MLD profile [ id ]
Show the detailed MLD profile configuration.
Step 5 end
Return to privileged EXEC mode.
Step 6 copy running-config startup-config
Save the settings in the configuration file.
to the specified port.
profile-id
Configuring MLD Snooping
Configuration Guide 339