Configuring The Acl Binding And Policy Binding - TP-Link T1600G-18TS Configuration Manual

Configuring ACL
Select your preferred policy and ACL, and click Apply
Select Policy
Select ACL

2.1.4 Configuring the ACL Binding and Policy Binding

You can select ACL binding or Policy binding according to your needs. An ACL or Policy
takes effect only after it is bound to a port or VLAN.
Configuring the ACL Binding
You can bind the ACL to a port or a VLAN. The received packets will then be matched and
processed according to the ACL rules.
 Binding the ACL to a Port
Choose the menu ACL > ACL Binding > Port Binding to load the following page.
Figure 2-9 Binding the ACL to a Port
Follow these steps to bind the ACL to a Port:
Select the ACL and the port, and click Apply
ACL ID
Select a Policy from the drop-down list.
Select an ACL to be applied to the Policy.
Select an ACL from the drop-down list.
.
.
ACL Configurations
Configuration Guide 518