Erase Startup-Config Command; Event Log Command; Event Show Command; Reset Command - Avaya P333R-LB User Manual

Chapter 6 Cajun Campus CLI - Layer 3

erase startup-config Command

The erase startup-config command erases the P333R-LB module NVRAM
configuration.
The syntax for this command is:
erase startup-config

event log Command

The event log command display a list of the P333R-LB event messages. The
event messages shown are encrypted and are reserved for Lucent technician use
only.
The syntax for this command is:
event log [<num>]
num
Example:
Router-N> log 20

event show Command

The event show command display the event status.
The syntax for this command is:
event show

reset Command

The reset command resets the P333R-LB module. This command resets only the
specific module. If the module is the master of the stack the entire stack is reset.
If you want to keep changes you made to the current running configuration use the
copy running-config startup-config command first.
The syntax for this command is:
reset
146
Number of event messages to display (max=30)
Avaya P333R-LB User's Guide