Chapter 6
Avaya P130 CLI
CAM Commands
Clear cam Command
Use the clear cam command to delete all entries from the CAM table.
The syntax for this command is:
clear cam
Example:
P130-1# clear cam
CAM table entry cleared.
Show cam Commands
Use the show cam commands to display the CAM table entries for a specific port or
MAC Address.
The syntax for this command is:
show cam [<mod_num>[/<port_num>]]
and
show cam mac <mac_addr>
<mod_num>
<port_num>
<mac_addr>
Example:
P130-N> show cam 1/1
Dest MAC/Route Dest Destination Ports
------------------- -----------------
00-40-0d-59-03-78
00-d0-79-0a-0a-da
00-40-0d-43-1e-e9
etc...
P130-N> show cam mac 00-40-0d-88-06-c8
Dest MAC/Route Dest Destination Ports
------------------- -----------------
00-40-0d-88-06-c8
Total Matching CAM Entries Displayed = 1
86
Module number
Number of the port on the module
MAC address
1/1
1/1
1/1
1/1
Avaya P130 User's Guide