Clear Secure Mac Command; Set Commands Summary Table - Avaya P333T User Manual

this command will delete the port mirror entry
- do you want to continue (Y/N)?
Mirroring packets from port 1/2 to port 1/4 is cleared

Clear secure mac Command

Use the clear secure mac command to remove a MAC address from the CAM
table of a secured port.
The syntax for this command is:
clear secure mac <mac-address> port <mod-num>/<port-num>
Example:
Cajun_P330-N> clear secure mac 1-2-3-4-5 port 1/17
01-02-03-04-05 cleared from secure address list for port 1/17

Set Commands Summary Table

Following is a Table of the Privileged Level set commands.
• set logout
• set timezone
• set ntp server
• set time protocol
• set ip route
• set snmp trap
• set snmp trap auth
• set snmp retries
• set snmp timeout
• set system
location
• set system name
Avaya P333T User's Guide
Chapter 6
y
Set the number of minutes before an
inactive CLI session automatically logs
out
Set the timezone for the system
Set the NTP server address
Set the time protocol for use in the
system
Add IP addresses to the IP routing table
Set the SNMP trap of the system or add/
delete an entry into/from the SNMP
trap receiver table
Enable/Disable the SNMP
authentication trap
Set the number of SNMP retries
Set the SNMP timeout
Set the system location
Set the system name
Cajun Campus CLI – Layer 2
Page 78
Page 79
Page 79
Page 79
Page 80
Page 80
Page 82
Page 82
Page 82
Page 82
Page 83
75