Three-Phase 200 V / 400 V Class
Figure D.5
EMC noise filter
Ground plate
(scrape off any visible paint)
A – Ground the cable shield
B – Enclosure panel
C – Metal plate
D – Grounding surface (remove any paint or sealant)
E – Drive
F – Motor cable (braided shield cable, max. 10 m)
Figure D.5 EMC Filter and Drive Installation for CE Compliance (Three-Phase 200 V / 400 V Class)
YASKAWA ELECTRIC SIEP C710616 27G YASKAWA AC Drive A1000 Technical Manual
L3
L2
Make sure the ground wire is grounded
L1
PE
Enclosure panel
Metal plate
Grounding surface
(remove any paint or sealant)
E
L3 L2
L3 L2 L1
L3
L2 L1
L1
Cable clamp
Motor
G – Motor
H – Cable clamp
I – Ground plate (scrape off any visible paint)
J – EMC noise filter
K – Make sure the ground wire is grounded
D.2 European Standards
Drive
Grounding surface
(remove any paint or sealant)
Motor cable (braided shield cable, max. 10 m)
Ground the cable shield
D
581