Installing Input Fuses - YASKAWA A1000 Technical Manual

High performance vector control drive type: cimr-a series models: 200 v class: 0.55 to 110 kw, 400 v class: 0.55 to 630 kw

Hide thumbs Also See for A1000:

Table of Contents

8.5 Installing Peripheral Devices

 Installing Input Fuses

NOTICE: If a fuse is blown or an equipment for residual current monitoring/detection (RCM/RCD) tripped, check the wiring and the

selection of the peripheral devices to identify the cause. Contact YASKAWA before restarting the drive or the peripheral devices if the

cause cannot be identified.

YASKAWA recommends installing a fuse on the input side of the drive to prevent damage to the drive if a short circuit

Select the appropriate fuse from

Note: Model CIMR-A4A1200 is UL compliant when the air entering the drive-installed panel or cabinet is 45C or less. For more

information, contact your nearest YASKAWA representative or our sales office.

 Attachment for External Heatsink (IP00 Enclosure)

An external heatsink can be attached that projects outside the enclosure. Steps should be taken to ensure that there is

enough air circulation around the heatsink.

Contact your YASKAWA sales representative or YASKAWA directly.

 EMC Filter Installation

This drive is tested according to European standards IEC/EN 61800-5-1 and complies with the EMC guidelines.

EMC Filter Installation on page 580

Table 8.12 Input Fuses

Manufacturer: Bussmann

Fuse Ampere Rating

Three-Phase 200 V Class

for details about EMC filter selection and installation.

YASKAWA ELECTRIC SIEP C710616 27G YASKAWA AC Drive A1000 Technical Manual

Manufacturer: Bussmann

Fuse Ampere Rating

Three-Phase 400 V Class

Show Quick Links

Chapters

Table of Contents