YASKAWA A1000 Technical Manual page 481

No.(Addr.) Name
F7-17
EtherNet/IP Speed Scaling Factor
(3F5H)
F7-18
EtherNet/IP Current Scaling Factor
(3F6H)
F7-19
EtherNet/IP Torque Scaling Factor
(3F7H)
F7-20
EtherNet/IP Power Scaling Factor
(3F8H)
F7-21
EtherNet/IP Voltage Scaling Factor
(3F9H)
F7-22
EtherNet/IP Time Scaling
(3FAH)
F7-23 to
F7-27
(3FBH to
3FFH) Dynamic Output Assembly
F7-28 to Parameters
F7-32
(370H to
374H)
F7-33 to
F7-42 Dynamic Input Assembly
(375H to Parameters
37EH)
F7-60
PZD1 Write
(780H)
F7-61
PZD2 Write
(781H)
F7-62
PZD3 Write
(782H)
F7-63
PZD4 Write
(783H)
F7-64
PZD5 Write
(784H)
F7-65
PZD6 Write
(785H)
F7-66
PZD7 Write
(786H)
F7-67
PZD8 Write
(787H)
F7-68
PZD9 Write
(788H)
F7-69
PZD10 Write
(789H)
F7-70
PZD1 Read
(78AH)
F7-71
PZD2 Read
(78BH)
F7-72
PZD3 Read
(78CH)
YASKAWA ELECTRIC SIEP C710616 27G YASKAWA AC Drive A1000 Technical Manual
All Modes
Sets the scaling factor for the speed monitor in EtherNet/IP Class ID 2AH Object.
All Modes
Sets the scaling factor for the output current monitor in EtherNet/IP Class ID 2AH Object.
All Modes
Sets the scaling factor for the torque monitor in EtherNet/IP Class ID 2AH Object.
All Modes
Sets the scaling factor for the power monitor in EtherNet/IP Class ID 2AH Object.
All Modes
Sets the scaling factor for the voltage monitor in EtherNet/IP Class ID 2AH Object.
All Modes
Sets the scaling factor for the time monitor in EtherNet/IP Class ID 2AH Object.
All Modes
Parameters used in Output Assembly 116. Each parameter contains a MEMOBUS/Modbus
address. The value received for Output Assembly 116 will be written to this corresponding
MEMOBUS/Modbus address. A MEMOBUS/Modbus address value of 0 means that the value
received for Output Assembly 116 will not be written to any MEMOBUS/Modbus register.
All Modes
Parameters used in Input Assembly 166. Each parameter contains a MEMOBUS/Modbus
address. The value sent for Input Assembly 166 will be read from this corresponding
MEMOBUS/Modbus address. A MEMOBUS/Modbus address value of 0 means that the value
sent for Input Assembly 166 is not defined by the user, therefore the option default register
value will be returned. 
Refer to Ethernet/IP Technical Manual for definitions of the default MEMOBUS/Modbus
registers.
All Modes
Sets MEMOBUS/Modbus address for PZD1 Write (PPO Write).
Values 0 to 2 enable the PZD1 Write as STW.
All Modes
Sets MEMOBUS/Modbus address for PZD2 Write (PPO Write).
Values 0 to 2 enable the PZD2 Write as HSW.
All Modes
Sets MEMOBUS/Modbus address for PZD3 Write (PPO Write).
Values 0 to 2 disable the PZD3 Write.
All Modes
Sets MEMOBUS/Modbus address for PZD4 Write (PPO Write).
Values 0 to 2 disable the PZD4 Write.
All Modes
Sets MEMOBUS/Modbus address for PZD5 Write (PPO Write).
Values 0 to 2 disable the PZD5 Write.
All Modes
Sets MEMOBUS/Modbus address for PZD6 Write (PPO Write).
Values 0 to 2 disable the PZD6 Write.
All Modes
Sets MEMOBUS/Modbus address for PZD7 Write (PPO Write).
Values 0 to 2 disable the PZD7 Write.
All Modes
Sets MEMOBUS/Modbus address for PZD8 Write (PPO Write).
Values 0 to 2 disable the PZD8 Write.
All Modes
Sets MEMOBUS/Modbus address for PZD9 Write (PPO Write).
Values 0 to 2 disable the PZD9 Write.
All Modes
Sets MEMOBUS/Modbus address for PZD10 Write (PPO Write).
Values 0 to 2 disable the PZD10 Write.
All Modes
Sets MEMOBUS/Modbus address for PZD1 Read (PPO Read).
Values 0 enable the PZD1 Read as ZSW.
All Modes
Sets MEMOBUS/Modbus address for PZD2 Read (PPO Read).
Values 0 enable the PZD2 Read as HIW.
All Modes
Sets MEMOBUS/Modbus address for PZD3 Read (PPO Read).
Values 0 disable the PZD3 Read.
Description
B.3 Parameter Table
Setting Page
Default: 0
Min: -15 –
Max: 15
Default: 0
Min: -15 –
Max: 15
Default: 0
Min: -15 –
Max: 15
Default: 0
Min: -15 –
Max: 15
Default: 0
Min: -15 –
Max: 15
Default: 0
Min: -15 –
Max: 15
Default: 0 –
Default: 0 –
Default: 0
Min: 0 –
Max: FFFF
Default: 0
Min: 0 –
Max: FFFF
Default: 0
Min: 0 –
Max: FFFF
Default: 0
Min: 0 –
Max: FFFF
Default: 0
Min: 0 –
Max: FFFF
Default: 0
Min: 0 –
Max: FFFF
Default: 0
Min: 0 –
Max: FFFF
Default: 0
Min: 0 –
Max: FFFF
Default: 0
Min: 0 –
Max: FFFF
Default: 0
Min: 0 –
Max: FFFF
Default: 0
Min: 0 –
Max: FFFF
Default: 0
Min: 0 –
Max: FFFF
Default: 0
Min: 0 –
Max: FFFF
481
B