YASKAWA A1000 Technical Manual page 509

No. (Addr.) Name
T2-03
PM Motor Type
(752H)
T2-04
PM Motor Rated Power
(730H)
T2-05
PM Motor Rated Voltage
(732H)
T2-06
PM Motor Rated Current
(733H)
T2-07
PM Motor Base Frequency
(753H)
T2-08
Number of PM Motor Poles
(734H)
T2-09
PM Motor Base Speed
(731H)
T2-10
PM Motor Stator Resistance
(754H)
T2-11
PM Motor d-Axis Inductance
(735H)
T2-12
PM Motor q-Axis Inductance
(736H)
T2-13 Induced Voltage Constant Unit
(755H) Selection
T2-14 PM Motor Induced Voltage
(737H) Constant
T2-15 Pull-In Current Level for PM
(756H) Motor Tuning
T2-16 PG Number of Pulses Per
(738H) Revolution for PM Motor Tuning
T2-17
Encoder Z-Pulse Offset
(757H)
<6> Default setting value varies by the drive model (o2-04).
<10> Default setting is determined by the control mode (A1-02).
<16> Default setting is determined by the control mode (A1-02) and the drive model (o2-04).
<18> Values shown here are for 200 V class drives. Double the value when using a 400 V class drive.
<37> The availability of certain Auto-Tuning methods depends on the control mode selected for the drive.
<39> Default setting is determined by the drive capacity and the motor code selected in T2-02.
YASKAWA ELECTRIC SIEP C710616 27G YASKAWA AC Drive A1000 Technical Manual
V/f V/f w/PG
OLV/PM AOLV/PM
0: IPM motor
1: SPM motor
V/f V/f w/PG
OLV/PM AOLV/PM
Sets the motor rated power.
V/f V/f w/PG
OLV/PM AOLV/PM
Enter the motor rated voltage as indicated on the motor nameplate.
V/f V/f w/PG
OLV/PM AOLV/PM
Enter the motor rated current as indicated on the motor nameplate.
V/f V/f w/PG
OLV/PM AOLV/PM
Enter the motor base frequency as indicated on the motor nameplate.
V/f V/f w/PG
OLV/PM AOLV/PM
Enter the number of motor poles for the PM motor as indicated on the motor nameplate.
V/f V/f w/PG
OLV/PM AOLV/PM
Enter the base speed for the PM motor as indicated on the motor nameplate.
V/f V/f w/PG
OLV/PM AOLV/PM
Enter the rotor resistance for the PM motor as indicated on the motor nameplate.
V/f V/f w/PG
OLV/PM AOLV/PM
Enter the d-axis inductance for the PM motor as indicated on the motor nameplate.
V/f V/f w/PG
OLV/PM AOLV/PM
Enter the q-axis inductance for the PM motor as indicated on the motor nameplate.
V/f V/f w/PG
OLV/PM AOLV/PM
0: mV/(min -1 ). E5-09 will automatically be set to 0.0, and E5-24 will be used.
1: mV/(rad/s). E5-24 will automatically be set to 0.0, and E5-09 will be used
V/f V/f w/PG
OLV/PM AOLV/PM
Enter the induced voltage coefficient for the PM motor as indicated on the motor nameplate.
V/f V/f w/PG
OLV/PM AOLV/PM
Sets the amount of pull-in current to use for Auto-Tuning as a percentage of the motor rated
current. Increase this setting for high inertia loads.
V/f V/f w/PG
OLV/PM AOLV/PM
Sets the number of pulses per revolution for the PG being used (pulse generator or encoder).
V/f V/f w/PG
OLV/PM AOLV/PM
Sets the offset between encoder offset and the rotor magnetic axis.
Description
OLV CLV
CLV/PM
OLV CLV
CLV/PM
OLV CLV
CLV/PM
OLV
CLV
CLV/PM
OLV CLV
CLV/PM
OLV CLV
CLV/PM
OLV CLV
CLV/PM
OLV CLV
CLV/PM
OLV CLV
CLV/PM
OLV CLV
CLV/PM
OLV
CLV
CLV/PM
OLV CLV
CLV/PM
OLV
CLV
CLV/PM
OLV CLV
CLV/PM
OLV CLV
CLV/PM
B.3 Parameter Table
Setting Page
Default: 1
Min: 0 130
Max: 1

Default:
<6>
Min: 0.00 kW 130
Max: 650.00 kW
Default: 200.0 V
<18>
Min: 0.0 V 131
Max: 255.0 V
<18>

Default:
<6>
Min: 10% of drive rated
current 131
Max: 200% of drive
rated current
Default: 87.5 Hz
Min: 0.0 Hz 131
Max: 400.0 Hz
Default: 6
Min: 2 131
Max: 48

-1
Default: 1750 min

Min: 0 min -1 131
Max: 24000 min -1

Default:
<39>
Min: 0.000 
131
Max: 65.000 

Default:
<39>
Min: 0.00 mH 131
Max: 600.00 mH

Default:
<39>
Min: 0.00 mH 131
Max: 600.00 mH
Default: 1
Min: 0 132
Max: 1

Default:
<39>
Min: 0.0 132
Max: 2000.0
Default: 30%
Min: 0% 132
Max: 120%
Default: 1024 ppr
Min: 1 ppr 132
Max: 15000 ppr
Default: 0.0 deg
Min: -180.0 deg 132
Max: 180.0 deg
509
B