YASKAWA A1000 Technical Manual page 579

High performance vector control drive type: cimr-a series models: 200 v class: 0.55 to 110 kw, 400 v class: 0.55 to 630 kw

Hide thumbs Also See for A1000:

Table of Contents

CE Standards Compliance for DC Power Supply Input

To meet CE standards, the following fuses should be installed. For details, refer to

Figure D.2 Example of DC Power Supply Input (two A1000 drives connected in series)

Note: 1. When connecting multiple drives together, make sure that each drive has its own fuse. If any one fuse blows, all fuses should be

2. For an AC power supply, refer to

3. The recommended fuses and fuse holders are made by Fuji Electric.

<1> Manufacturer does not recommend a specific fuse holder for this fuse. Contact YASKAWA or your nearest sales representative on fuse

Guarding Against Harmful Materials

When installing IP00 enclosure drives, use an enclosure that prevents foreign material from entering the drive from

above or below.

YASKAWA ELECTRIC SIEP C710616 27G YASKAWA AC Drive A1000 Technical Manual

DC power supply

Standard Connection Diagram on page

Table D.1 Fuses and Fuse Holders

DC Power Supply Input

Short-circuit

Current (kA)

D.2 European Standards

DC Power Supply Input

Short-circuit

Current (kA)

Show Quick Links

Chapters

Table of Contents