YASKAWA A1000 Technical Manual page 146

5.1 A: Initialization
Press F1 , F2
2.
left right
3.
Press to scroll to A1-04 and
4. Enter the password "1234".
5.
Press to save the new password.
6. Drive returns to the parameter display.
7.
Press and scroll to A1-02.
8.
Press to display the value set to A1-02. If the first "2" blinks, parameter settings are unlocked.
9.
Use or to change the value if desired (though changing the control mode at this point is not typically done).
10.
Press to save the setting, or press
11. The display automatically returns to the parameter display.
Note: Parameter settings can be edited after entering the correct password. Performing a 2-wire or 3-wire initialization resets the
password to "0000". Reenter the password to parameter A1-05 after drive initialization.
Enter a setting other than the password (e.g., 0000) in A1-04 to use the set password to release the lock and restore the lock with
the same password after changing parameter settings.

A1-06: Application Preset
Several Application Presets are available to facilitate drive setup for commonly used applications. Selecting one of these
Application Presets automatically programs certain parameters to a new set default values and selects the functions for
the I/O terminals that best suit the application. All parameters changed when selecting an Application Preset are also
assigned to the list of User Parameters, A2-01 through A2-16. These can be edited more easily in the Setup Mode and
provide quicker access by eliminating the need to scroll through multiple menus.
Refer to Application Selection on page 114
146
Step
or to select the flashing digits as shown.
.
to return to the previous display without saving changes.
for details on parameter A1-06.
YASKAWA ELECTRIC SIEP C710616 27G YASKAWA AC Drive A1000 Technical Manual
Display/Result
-PRMSET- PRG
Select Language
A1-00= 0 ∗0∗
English
← →
FWD
"00" flashes
-PRMSET- PRG
Enter Password
A1- 04 = 0
(0~9999)
"0"
← →
FWD
-PRMSET- PRG
Enter Password
A1- 04 = 1234
(0~9999)
"0"
← →
FWD
Entry Accepted
-PRMSET- PRG
Enter Password
A1- 04 = 0
(0~9999)
"0"
← →
FWD
-PRMSET- PRG
Control Method
A1-02= 2 ∗2∗
Open Loop Vector
← →
FWD
-PRMSET- PRG
Control Method
A1-02= 2 ∗2∗
Open Loop Vector
← →
FWD
-PRMSET- PRG
Control Method
∗2∗
A1-02= 0
V/F Control
"2"
← →
FWD
V/f
Entry Accepted
-PRMSET- PRG
Control Method
∗0∗
A1-02= 0
V/F Control
← →
FWD