Setting Color Mode/Maximum Number Of Copies - Xerox DocuColor 2240 User Manual

U G ( M
S E R U I D E A C H I N E

Setting Color Mode/Maximum Number of Copies

Output Color Control
Copies Made
Change Copy Limit
4 – 5 8
A )
D M I N I S T R A T O R
This section describes the procedure for setting Output Color
Control and the maximum number of copies to registered
accounts.
You can select not to restrict color copying or B/W copying, or
select B/W copying only or color copying only.
The number of copies made so far is displayed. The number of
copies can be categorized by B/W copying and color copying.
When making color copies, the maximum number of copies can
be set between 100 - 1999900 (seven digits). Set this number in
100-page increments. When making B/W copies, the maximum
number of copies can be set within the range 1000 - 1999000
(seven digits). Set this number in 1000-page increments. The
defaults are 1999900 for color copies and 1999900 for B/W
copies.
1
Select Create/Check Account Data on the Auditron
Administration screen. The Create/Check Account Data screen is
displayed.
2
Select the account to set copy restrictions to, and select Create/
Check. The Create/Check screen is displayed.
3
To set Output Color Control, select Output Color Control. The
Output Color Control screen is displayed. Select an available color
mode, and select Save.
4
To set the Copy Limit, select Change Copy Limit. The Copy Limit
screen is displayed. Enter the maximum number of color copies
using Numeric Keypad, and select Enter/Next. Enter the
maximum number of B/W copies using Numeric Keypad, and
select Save. The screen returns to the Create/Check screen.