Kyocera KM-C2520 Service Manual page 93

Maintenance
item No.
Checking the operation of the finisher
U240
Description
Turns each motor and solenoid of optional 3000-sheet document finisher ON.
Purpose
To check the operation of each motor and solenoid of the document finisher.
Method
1. Press the start key.
2. Select the item to be checked.
Display
FINISHER MOTOR
FINISHER SOL
MAIL BOX
BOOKLET
Method: Checking the motor of the document finisher
1. Select the item to be operated.
Display
CAR MT M
CAR MT L
CNV MT H
CNV MT M
CNV MT L
EJE MT H
EJE MT M
EJE MT L
SUB P MT H
SUB P MT M
B UP MT
B D MT
WID A3 TEST
WID LD TEST
STPL FR MT
STPL S MT
STPL M MT
TRAY MT
PUNCH MT
PUDDLE MT
2. To stop motor driving, press the selected item again.
Description
Description
Checking the motor of the document finisher
Checking the solenoid of the document finisher
Checking the motor and solenoid of the mailbox
Checking the motor of the centerfold unit
Motor
Paper entry motor (PEM) is turned on at middle speed.
Paper entry motor (PEM) is turned on at low speed.
Paper conveying motor (PCM) is turned on at high speed.
Paper conveying motor (PCM) is turned on at middle speed.
Paper conveying motor (PCM) is turned on at low speed.
Eject motor (EJM) is turned on at high speed.
Eject motor (EJM) is turned on at middle speed.
Eject motor (EJM) is turned on at low speed.
Relief path motor (RPM) is turned on counterwise.
Relief path motor (RPM) is turned on clockrwise.
Paper conveying belt motor 1 (PCBM1) is turned on.
Paper conveying belt motor 2 (PCBM2) is turned on.
Side registration motor 1/2 (SRM1/2) are turned on.
Side registration motor 1/2 (SRM1/2) are turned on.
Staple moving motor 1 (STMM1) is turned on.
Staple moving motor 2 (STMM2) is turned on.
Staple motor (STM) is turned on.
Main tray motor (MTM) is turned on.
Punch motor (PUNM) is turned on.
Paddle motor (PDM) is turned on.
2FZ/2F0/2HC-4
1-3-53