Kyocera KM-C2520 Service Manual page 119

Maintenance
item No.
Setting the ID correction operation
U464
Description
Turns ID correction on or off. Also, this determines the duration of ID correction and the timing of ID correction
during printing.
Purpose
To restrict ID correction when poor image quality is generated.
Start
1. Press the start key.
2. Select the item to be set. The setting screen for the selected item is displayed.
Display
Permission
Set Time Interval
Change Timing During Print
Set Calibration Timing
Set Mode at Color Print
Setting: ID correction ON/OFF
1. Select ON or OFF.
Display
ON
OFF
Initial setting: ON
2. Press the start key. The setting is set, and The screen for selecting a maintenance item No. is displayed.
Setting: Interval time of correction
1. Change the setting value using the cursor up/down keys.
Description
Setting the interval time of ID correction
2. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Setting: Correction timing during printing
1. Change the setting value using the cursor up/down keys.
Description
Setting the ID correction timing during printing
2. Press the start key. The setting is set, and the screen for selecting a maintenance item No. is displayed.
Setting: Timing for calibration
1. Select ON or OFF.
Display
Right After Finish Print
After Auto Clear Time
Initial setting: After Auto Clear Time
2. Press the start key. The setting is set, and The screen for selecting a maintenance item No. is displayed.
Setting: Timing for calibration in color printing
1. Select ON or OFF.
Display
Print Speed Priority
Image Quality Priority
Initial setting: Print Speed Priority
2. Press the start key. The setting is set, and The screen for selecting a maintenance item No. is displayed.
Completion
Press stop/clear key. The screen for selecting a maintenance item No. is displayed.
Description
Description
Setting to allow ID correction
Setting the interval time of correction
Setting the correction timing during printing
Timing for calibration
Timing for calibration in color printing
Description
Turns ID correction ON
Turns ID correction OFF
Description
Performs ID calibration as soon as printing has finished.
Performs ID calibration after printing has finished and the auto clear
time has timed out.
Description
Performs ID calibration for the period predetermined by [Change Tim-
ing During Print].
Performs ID calibration when the period the black developing unit is
operated accumulates four minutes and printing has finished.
Setting range Initial setting
0 to 9999 (s) 480
Setting range Initial setting
0 to 10 2
2FZ/2F0/2HC-3
1-3-79