Image Formation Problems - Kyocera KM-C2520 Service Manual

1-4-3

Image formation problems

(1)No image appears
(entirely white).
See page 1-4-50.
(6)A white line
appears longitudi-
nally.
See page 1-4-52.
(11)The leading edge
of the image is
consistently mis-
aligned with the
original.
See page 1-4-53.
(16)Fusing is poor.
See page 1-4-55.
(2)No image appears (3)Dirty on the back
(entirely black).
See page 1-4-50.
(7)A line appears lon- (8)A line appears lat-
gitudinally.
See page 1-4-52.
(12)The leading edge (13)Paper creases.
of the image is
sporadically mis-
aligned with the
original.
See page 1-4-53.
(17)Image is out of (18)Colors are printed
focus.
See page 1-4-55.
(4)Image is too light.
side.
See page 1-4-51. See page 1-4-51.
(9)One side of the
erally.
See page 1-4-52. See page 1-4-53.
(14)Offset occurs.
See page 1-4-54. See page 1-4-54.
(19)Image center
offset to each
other.
See page 1-4-55. See page 1-4-55.
(5)The background is
colored.
See page 1-4-51.
(10)Dots appear on
copy image is the image.
darker than the
other.
See page 1-4-53.
(15)Image is partly
missing.
See page 1-4-54.
does not align with
the original center.
2FZ/2F0/2HC-5
1-4-49