Kyocera KM-C2520 Service Manual page 56

2FZ/2F0/2HC-5
Maintenance
item No.
Adjusting the deflection in the paper
U051
Description
Adjusts the deflection in the paper at the registration roller.
Purpose
Make the adjustment if the leading edge of the copy image is missing or varies randomly, or if the copy paper
is Z-folded.
Adjustment
1. Press the start key.
2. Select the item.
Display
MPT (Large)
MPT (Small)
MPT Half (Large)
MPT Half (Small)
Cassette (Large)
Cassette (Small)
Duplex (Large)
Duplex (Small)
Large size: 218 mm or more in width of paper.
3. Press the interrupt key.
4. Place an original and press the start key to make a test copy.
5. Change the setting value using the cursor up/down keys.
For output example 1, increase the value. For output example 2, decrease the value.
The greater the value, the larger the deflection; the smaller the value, the smaller the deflection.
6. Press the start key. The value is set.
Remark
When changing the setting value of [Large] each item is modified, equal to amount of the value which is
changed adds also the value of [Small] each item and is pulled.
Completion
Press the stop/clear key. The indication for selecting a maintenance item No. appears.
1-3-16
Description
Description
Paper feed from MP tray
Paper feed from MP tray
Paper feed from MP tray
Paper feed from MP tray
Paper feed from cassette
Paper feed from cassette
Duplex mode (second)
Duplex mode (second)
Original
example 1
Figure 1-3-3
Setting
range
-30 to 20
-30 to 20
-30 to 20
-30 to 20
-30 to 20
-30 to 20
-30 to 20
-30 to 20
Copy Copy
example 2
Initial Change in
setting value per step
0 1 mm
0 1 mm
0 1 mm
0 1 mm
0 1 mm
0 1 mm
0 1 mm
0 1 mm