Kyocera KM-C2520 Service Manual page 132

2FZ/2F0/2HC-5
Maintenance
item No.
U926 If the operation was successful:
EXECUTE 0100
CHECK SUM ****
CODE 0000
If the operation failed:
EXECUTE 0100
CHECK SUM ****
CODE XXXX
Where XXX is the error code indicating the reason for the failure.
See Error Codes for Operation U917 and U926 on P.1-3-90.
11. Press the power key on the operation panel, and after verifying the power indicator has gone off, switch
off the main power switch.
12. Remove the Compact Flash from the machine.
Clearing the all copy counts and machine life counts (one time only)
U927
Description
Resets all of the counts back to zero.
Supplement
The total account counter and the machine life counter can be cleared only once if all count values are 1000
or less.
Method
1. Press the start key.
2. Press [EXECUTE].
3. Press the start key. All copy counts and machine life counts are cleared.
CANNOT EXECUTE is displayed if the count cannot be cleared.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Checking machine life counts
U928
Description
Displays the machine life counts.
Purpose
To check the machine life counts.
Method
Press the start key. The current machine life counts is displayed.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
Checking/clearing the charger roller count
U930
Description
Displays the counts of the charger roller counter for checking or clearing.
Purpose
To check the count after replacement of the charger roller unit.
To clear the counter value when replacing the charger roller unit.
Method
Press the start key. The current counts of the charger roller count for each color is displayed.
Clearing
1. Press the reset key.
2. Press the start key. All counts are cleared.
Setting
1. Enter seven-digit value using the numeric keys.
2. Press the start key. The value is set.
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
1-3-92
Description